2-Way Active Master Line Array Module and 2-Way Slave Line Array Module, 2×6.5″ Neo Woofers incl. Phase Plug, 2×1″ Neo Drivers, 200 (M2M)+200 (M2S) W/RMS, 90-19.000 Hz, 126 dB SPL, SMPS with auto-range, Dimensions: 460x190x345 mm, Weight M2M: 7.6 kg, Weight M2S: 7.1 kg
Offering the same user-friendliness and sound quality of its DVA predecessors, this 2-Way Active Line Array System sets the new benchmark for high-end sound performance thanks to the innovative Master+Slave design which aacks high SPL in incredibly small dimensions and weight. A super versatile system for both portable and permanent installation solutions.
Each unit of DVA MINI system is comprised of two line array modules, each with two 6.5” neodymium woofers and two 1” high-frequency compression drivers. The M2M module is the master module that contains the 400-watt Digipro G3 amplifier that power both the M2M and M2S slave module. The system achieves 126 dB max SPL per unit. Constructed in solid Polypropylene reinforced with an internal anti-vibration structure, DVA MINI features a new fast-lock mechanic design: users simply place one module below the other and slide it towards one side until it locks in place. Moreover, every DVA MINI module has a back mechanic with incremental steps allowing different line array positioning angles.
System of digital amplification engineered by dBTechnologies.Based on the previous Digipro projects, completely re-designed, lighter in weight and more efficient, new Heatsink, newest components which maximize the power with a lower consumption.
A software able to supply each and every necessary information on the installation of the DVA systems depending on the necessities of the event. It supplies incidence angles between speakers, pre-set equalizations, Delay time for subwoofers and generates a preview of the sound diffusion based on the systems set up. It also allows to check the best set up for the subwoofer drums depending on stage and venue needs.
The opportunity of modifying the character and equalization of a speaker is a very important prerogative in adapting a speaker to multiple functions. The introduction of the Preset System in dBTechnologies’ FM monitors enables to choose directly from the box the most adeguate equalization for the desired use, optimizing performances without the need of external processors. The management of phase, limiter and
x-over will be modified automatically depending on the chosen set-up, preserving the internal acoustic equipment.
PSU with auto-range
It’s a power supply which allows everybody in the world to use the speaker at any power voltage thanks to the auto-adjustment technology: the internal switch automatically detect the voltage and changes from 110/120v to 230/240v.
Speaker Type M2M – 2-Way Active Master Line Array Module
Speaker Type M2S – 2-Way Slave Line Array Module
Frequency Response [-6dB] – 78 – 19.000 Hz
Frequency Response [-10dB] – 68 – 20.000 Hz
Max SPL – 126 dB per unit
HF – 2×1″
Type HF – Neodymium
Voice Coil HF – 1″
LF – 2×6.5″
Type LF – Neodymium
Voice Coil LF – 1.5″
Directivity – 90×15°
Amp Technology – Digipro® G3
Amp Class – Class D
RMS Power HF Amp – 200 W (100 W + 100 W)
RMS Power LF Amp – 200 W (100 W + 100 W)
Cooling – Convection
Controller – DSP 56 bit
AD/DA Converter – 24 bit/48 kHz
System Presets – 9 presets (8x HF and Low-Mid corrections and 1x for service use)
Limiter – Multiband, RMS/Peak, Thermal
Crossover Frequency LF-HF – 1800 Hz
Slope LF-HF – 24 dB/Octave
Signal Input – 1x XLR fem, Bal.
Signal Output – 1x XLR male, Bal.
Power Supply – 400W SMPS with PSU Auto-range (110V~ and 220V~)
Power Socket – 1x PowerCon In 1x PowerCon Out
Signal Input M2S – 1 Custom connector
Housing – Polypropylen PP
Handles – 2x back side
Fittings – Integrated hardware with fast lock mechanics