Sale!

EVE AUDIO SC205 Silver-Cone Two-Way System Studio Monitor

106,579.00

Description

PROFESSIONAL STUDIO MONITOR COMBINING COMPACT DIMENSIONS AND HIGH-END TECHNOLOGIES FOR AUTHENTIC SIGNAL REPRODUCTION WITHIN ANY PROFESSIONAL SYSTEM FROM STEREO TO SURROUND

TECH TALK

The SC205 uses our 5″ SilverCone woofer for an extended bass response. This very stiff diaphragm is honeycomb structured and glass fibre coated. Like in other models, such as the smaller SC204, the SC205 is driven by a sophisticated low distortion copper cap magnet system that uses a 1″ voice coil responsible for delivering a greater linear excursion. All in all, this produces a bigger dynamic range than you would naturally assume from a speaker of these proportions. The result is an unsurpassed audio transparency that, when coupled with our proprietary AMT tweeter and PWM amplifier, will surprise you with a very powerful and precise low end.

Our AMT (Air Motion Transformer) tweeter is our own proprietary technology that follows the rule of not using “off-the-shelf” components when looking for the best possible results. The preciseness and detail in the high frequency, along with the general tightness of the bass and mid-range frequencies, will make the SC205 equally adequate for use on the road or in studio.

DSP / SMART-KNOB

All EVE Audio monitors feature a high-resolution DSP electronics. A high-quality analog/digital converter from BurrBrown (24bit/192kHz) converts the analog input signal supplied via RCA or XLR. The DSP ensures latency-free filtering and simultaneously protects the entire frequency range from overload. When switched on, the volume of the monitor increases slowly to leave enough time to reduce the source volume if the input signal is too loud.

Adjustments to the acoustic environment can be made via the front rotary/pressure encoder, the SMART-knob with rotating LED ring. This knob allows the levelling of system volume as well as the adjustment of filters for room variables (low shelf, mid eq and high shelf filters). All settings are displayed on the LED ring, providing instant information about the selected values. The brightness of the LED ring can be adjusted for dark studios or video applications.

High-quality Class D amplifiers complete the system and deliver enough power to the demands of modern music production. Selected volume and/or filter settings can be independently fixed with DIP-switches that are positioned on the rear of the amplifier to prevent unauthorized.

BASS PORT DESIGN

It’s all in the geometry. One of the downside effects of port compression is bass distortion. As you turn up the volume, the efficiency of the port reduces and distortion will increase.

We opted for a large rear rectangular port with no hard edges for our bass port designs. That’s one of the reasons EVE monitors have a high efficiency on the lower frequencies.

The results? High sound pressures with tight and punchy bass frequencies that don’t cause port distortion. Crank up the volume, and EVE will deliver a round bass. And with no holes to look at every time you glance at your speakers.

or unintentional adjustments.

MEASUREMENTS

Free-field frequency response (1/6 oct.)Top = Vertical configuration / Bottom = Horizontal configuration
Red = 0° / Green = 30° horizontal off-axis

DistortionOrange = 2nd / Green = 3rd vs frequency response (red)

Polar pattern (1m)Top = Vertical configuration / Bottom = Horizontal configuration
Red = 200Hz / Green = 1kHz / Blue = 5kHz

 

Please follow and like us:

TECH TALK & DSP

Please follow and like us:

SPECS

Description Midfield Monitor
Dimensions (WxHxD) [mm] 500 x 215 x 310
Dimensions (WxHxD) [“] 19.69 x 8.46 x 12.2
Free-field frequency range (-3dB) 40Hz – 21kHz
Tweeter AMT RS2
Mid-Woofer 165mm/6.5″
Woofer 165mm/6.5″
Cross-over frequency 300Hz/2800Hz
Max SPL per pair 122dBspl
Number of amplifiers 3
Output power (woofers) 2 x 100W
Output power (tweeter) 50W
Protection limiter
Settings
Volume -inf. – +6dB
High-shelf filter (-5dB – +3dB) > 3kHz
Desk filter boost (0dB – +3dB) 80Hz
Desk filter cut (-5dB – 0dB) 160Hz
Low-shelf filter (-5dB – +3dB) < 300Hz
LED brightness setting
Level-lock dip switch
Filter-lock dip switch
Woofer-change dip switch (L/R)
Connectors
XLR in (impedance)  (10k)
RCA in (impedance)  (10k)
Power consumption
Standby < 1W
Full output 350VA
Misc.
Weight [kg/lb.] 12.4 / 27.3

 

Please follow and like us:

MEDIA

Please follow and like us: