Cub 10 Amplifier – Laney


Amplifier Cub 10

Out of stock

SKU: Cub 10 Categories: , , Tags: , ,


The CUB 10 is not just a bigger CUB 8, it is a totally different amplifier and comes from further along the evolutionary path of tube amp design.

The CUB 10 is a Class A/B design and produces 10 watts RMS of power from an output section loaded with a pair of 6v6GT’s, driven from a pre amp loaded with 2 ECC83’s. The pre amp compliment consists of a Tone control, a Volume control and a Gain control, along with a set of Hi & Lo input jacks. The CUB 10 houses a 10″ Celestion driver.

The CUB 10’s Class A/B output section gives this amp a nicely pronounced mid range – which is where the natural frequencies of the guitar instrument sit. This means that the CUB 10 has a very natural and responsive mid range when run clean. Push the amp a little harder and things begin to get very Zeppelin-esque – think “Heartbreaker”. Hit the strings harder and the amp breaks up ever so responsively, dial in more gain and the amp really starts to cook with vintage tone. The pair of 6V6GT’s work hard to give plenty of low-end punch for a small tube amp, perfect for a bluesy solo.


Power RMS 10 watts RMS
Inputs Hi & Lo
Equalisation Tone
Preamp Valves 2 x ECC83
Output Valves 2 x 6V6GT
Class Class A/B
Reverb No
Footswitch No
FX Loop(s) No
Impedance 8 Ohm
Drivers 10 inch Celestion Driver
Weight 8.25 Kg
Dimensions Width 365mm x Height 355mm x Depth 220mm
Channel Controls Tone, Volume & Gain

Additional information

Weight 8.25 kg
Dimensions 22 × 36.5 × 35.5 cm