Sound Pressure Level – the real measure of a powered speaker!
SPL (sound pressure level) is also commonly referred to as efficiency and sensitivity. This parameter is a measure representing a speaker’s loudness. A higher SPL equates to a louder speaker.
The PVX™p 12 powered enclosures deliver higher SPL while providing high-fidelity and impressive power using Peavey’s legendary speaker and amp technology. These enclosures bring 800 watts peak of crystal-clear highs and deep low end, while using exclusive DDT™ compression technology to maintain clarity throughout the mix.
The Peavey PVXp 12 is constructed with a 12″ heavy-duty, premium Peavey woofer with a 2-3/8-inch voice coil for the lows and low-mids, while the Peavey RX14™ 1.4-inch titanium diaphragm compression driver, coupled to a constant directivity horn, handles the highs and mid-highs.
Peavey PVX enclosures are housed in a durable, injection-molded enclosure that includes a pole mount, three multi-point flying locations and a tilt-back design to accommodate use as a personal monitor. A black powder-coated steel grille provides driver protection and a clean, professional appearance.
With compact size, solid construction, multiple flying and mounting options, ample power and features, these will be your “go to” speakers for sound reinforcement.
Two-way 800 watt peak power enclosure
Multiple cabinet fly points
Pole mountable cabinet
RX™ 14 titanium compression driver
12″ high-performance Peavey woofer with 2.3″ voice coil
Angled side for use as monitor when required
LED signal present and DDT active indicator
Rugged polypropylene molded enclosure
Combination 1/4″ and XLR input
Exclusive DDT™ compression and speaker protection
XLR and 1/4″ through outputs
Molded in cabinet handles
Weight Unpacked: 42.00 lb(19.051 kg)
Weight Packed: 48.00 lb(21.772 kg)
Width Packed: 20″(50.8 cm)
Height Packed: 26.75″(67.945 cm)
Depth Packed: 18.25″(46.355 cm)
PV 14 USB Overview
The PV 14 USB features built-in DSP effects with multiple reverbs and delays, plus vocal enhancer and much more, while a USB port allows direct connection to a USB-equipped computer for recording from the mixer or playing back digital audio (compatible with Mac OSX, Windows XP, ME & 2000). It also includes pre-fader monitor sends; post-fader effects send; inserts on all channels; and dual, switchable line inputs on the two stereo channels.
All PV Series mixers include our Tape to Control Room and Tape to Mix assigns, which allow the operator to monitor an external stereo signal without using any of the mixer’s channels. In addition, the mixers’ Control Room output sends a stereo master output signal to an external source for monitoring. Phantom power, effects send and a contour switch are also standard on all models.
|Compatable with Mac OSX, Win XP, ME and 2000|
|Built-in DSP effects processor|
|Ten RQ™ (reference quality) low noise microphone inputs with insert points|
|Channels 11/12 and 13/14 with dual switchable stereo line inputs|
|3-band EQ on all channels|
|LED clip, signal, mute indication|
|One pre-fader monitor send|
|One post-fader effects send|
|Precision 60 mm faders on input channels and stereo master outputs|
|Control room output|
|Global 48V phantom power, tape to control room and tape to mix assignments|
|Stereo outputs with 1/4″ unbalanced and XLR balanced connectors|
|Rugged console design|
|Universal switching power supply|
|USB port to connect to a computer for recording or playing back digital audio to/from computer|
|Weight Unpacked: 12.10 lb(5.488 kg)|
|Weight Packed: 15.00 lb(6.804 kg)|
|Width Packed: 6″(15.24 cm)|
|Height Packed: 20.56″(52.2224 cm)|
|Depth Packed: 12.62″(32.0548 cm)|